Airspeed

8000 Series

Specification UI8000 Specification UI8000-B445

The 8000 Series Airspeed Indicator is intended for use on an aircraft to indicate the speed relative to the air at sea level altitude, to indicate the equivalent speed corresponding to the actual force of the air. When properly connected to an airspeed tube, mounted so as to be in undisturbed air, the airspeed indicator measures the differential pressure developed between the pitot and static opening. The pressure is indicated in units of airspeed mph and/or knots.

Certification:	FAA TSO C2b
Case Configuration:	MS33638, 3 inch
Typical Weight:	0.7 pounds
Static, Pitot Pressure Connector:	1/8-27 ANPT
Installation:	Removable spring nuts and #6-32 screws
Lighting:	Available upon request

 

 

8100 Series

The 8100 Series True Airspeed Indicator is intended for use on an aircraft to indicate the speed relative to the air at sea level or the desired altitude, to indicate the equivalent speed corresponding to the actual force of the air. The indicator has an inner dial to indicate true airspeed. That is, the altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. When properly connected to an airspeed tube, mounted so as to be in undisturbed air, the airspeed indicator measures the differential pressure developed between the pitot and static opening. The pressure is indicated in units of airspeed mph and/or knots.

Certification:	FAA TSO C2b
Case Configuration:	MS33638, 3 inch
Typical Weight:	0.7 pounds
Static, Pitot Pressure Connector:	1/8-27 ANPT
Installation:	Removable spring nuts and #6-32 screws
Lighting:	Available upon request